# Control Gear

> 
> Last updated: 2026-08-07

## Search

- Search URL: `https://www.controlgear.net?s={query}`

## Recent Content

- [Pneumatic vs Electric Actuators in Wet or Dirty Environments](https://www.controlgear.net/blog/pneumatic-vs-electric-actuators-in-wet-or-dirty-environments/): Pneumatic vs Electric Actuators in Wet or Dirty Environments is not a neat one-winner comparison. Wet washdown, combustible dust, 100% duty cycles, leak cost, positioning tolerance and maintenance access all change the answer.
- [How to Choose Point-of-Use Filtration for Pneumatic Systems](https://www.controlgear.net/blog/how-to-choose-point-of-use-filtration-for-pneumatic-systems/): Point-of-use filtration protects pneumatic valves, cylinders, tools, and product-contact processes by cleaning compressed air immediately before it reaches the equipment. Choosing point-of-use filtration for pneumatic systems comes down to three checks: contaminant risk, ISO purity class, and the pr
- [How to Size a Pneumatic Cylinder for Force, Stroke and Cycle Rate](https://www.controlgear.net/blog/how-to-size-a-pneumatic-cylinder-for-force-stroke-and-cycle-rate/): To size a pneumatic cylinder for force, stroke and cycle rate, calculate the theoretical force using \(F = P \times A\), apply a 10% to 15% safety margin, check stroke and rod buckling, then calculate compressed air demand from the number of cycles per minute. That sequence stops the actuator stalli
- [Washdown Pneumatics for Food and Beverage Sites](https://www.controlgear.net/blog/washdown-pneumatics-for-food-and-beverage-sites/): Washdown pneumatics for food and beverage sites need two specifications working together: clean mechanical components that survive sanitation, and compressed air quality proven against BCAS and ISO 8573-1 limits. If either side is weak, the risk moves from downtime into contamination, audit failure
- [Norgren Valves Explained: Common Types, Failure Points and Selection Rules](https://www.controlgear.net/blog/norgren-valves-explained-common-types-failure-points-and-selection-rules/): Norgren valves are not catalogue parts. On a production line, the wrong valve can cause slow cylinders, coil heat, pressure instability, failed isolation, and repeat faults.

## Complete Sitemap

For a comprehensive list of all URLs, see: https://www.controlgear.net/sitemaps.xml

---

*This file is dynamically generated and highlights our most important content.*